dd mac status 1

dd mac status

sudo dd if=/dev/rdiskX bs=1m | pv -s 64G | sudo dd of=/dev/rdiskY bs=1m

Here is what the above code is Doing:
1. sudo dd if=/dev/rdiskX bs=1m
– This is the command to read the disk.
– rdiskX is the disk you want to read from.
– bs=1m is the block size.
2. | pv -s 64G
– This is the command to show the progress of the read.
– -s 64G is the size of the disk.
3. | sudo dd of=/dev/rdiskY bs=1m
– This is the command to write the disk.
– rdiskY is the disk you want to write to.
– bs=1m is the block size.

Similar Posts